Heavy Duty Gearbox
Heavy duty oil filled gearboxes
Single Auger
Images
Highlights
Single auger snowblowers for a wide range of tractor sizes.
Cutting widths of 60" to 108"
Manual and hydraulic chute rotator (hydraulic cylinder or orbital motor) available on most models (refer to spec sheet for configurations).
Heavy augers and shaft, 4 blade fan, greaseable bearings, heavy duty gearbox, tapered roller bearings.
Available options include – spout deflectors, skid shoes, cutting edge and more
Specifications
| MODEL SIZE | S5 | S6 | S65 | S7 | S75 | S100 | S9 |
| Approx. Weight (Lbs.) | 510 | 545 | 885 | 920 | 995 | 1430 | 1570 |
| Cutting Width | 60 | 72 | 78 | 84 | 90 | 100 | 108 |
| Cutting Height | 24 | 24 | 30 | 30 | 30 | 33 | 33 |
| Fan Shaft Diameter | 1 3/8 | 1 3/8 | 40mm | 40mm | 40mm | 1 3/4 | 1 3/4 |
| Fan Blades | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| Fan Diameter | 22 | 22 | 26 | 26 | 28 | 28 | 28 |
| Fan Housing Width | 8 | 8 | 8 | 8 | 8 | 12 | 12 |
| Fan Housing (thickness) | 10 ga. | 10 ga. | 10 ga. | 10 ga. | 10 ga. | 3/16 | 3/16 |
| Auger Diameter | 14 | 14 | 17 | 17 | 17 | 20 | 20 |
| Auger Shaft Diameter | 1 1/4 | 1 1/4 | 1 7/16 | 1 7/16 | 1 7/16 | 1 7/16 | 1 7/16 |
| Auger Flighting Thickness | 5/16 | 5/16 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 |
| Auger Chain Size | #60 | #60 | #60 | #60 | #60 | #80 | #80 |
| Chute Diameter | 12 | 12 | 12 | 12 | 12 | 13 | 13 |
| Chute Length | 36 | 36 | 36 | 36 | 36 | 48 | 48 |
| Hydraulic Chute Rotator | Opt. | Opt. | N/A | N/A | N/A | N/A | N/A |
| Orbital Motor Chute Rotator | Opt. | Opt. | Opt. | Opt. | Opt. | Stan. | Stan. |
| Spout Deflector (Single) | Stan. | Stan. | Stan. | Stan. | Stan. | Stan. | Stan. |
| Hitch Category | 1 & 2 | 1 & 2 | 1 & 2 | 1 & 2 | 1 & 2 | 2 | 2 |
| Recommended H.P. (min) | 20 | 20 | 35 | 40 | 50 | 80 | 80 |
| Recommended H.P. (max) | 35 | 35 | 70 | 70 | 90 | 105 | 105 |
H.P. recommendations are suggested only (pending snow and ground speed conditions and transmission type)
Unless otherwise indicated, all dimensions are in inches with standard equipment installed.
Specifications subject to change without notice.
Certain features shown may be optional.
Features
Standard
Robust Build
Heavy augers & shafts, thick wall steel end plates & shell, greaseable bearings
Single Section Spout Deflector
Control where you want the snow to be blown
Heavy PTO shaft
Heavy duty PTO shaft with shear bolt protection
Four Blade Fan
Heavy duty four blade fan on all models
Manual Hood Rotator
An easy to turn crank system for hood rotation
Optional
Hydraulic Rotator
Allows rotation of the hood without the manual effort.
(Models S5 & S6 only)
Orbital Rotator
Precise hood rotation with a hydraulic orbital motor and a durable gear drive. Standard on models S100 & S9
Bolt-On Skid Shoes
Prevent scratching or digging in of expensive driveways (models S5-S75)
Weld-On Skid Shoes
Prevent scratching or digging in of expensive driveways with a heavy duty adjustable skid shoe (models S100-S9)
Reinforced End Plates
Keeps your blower end plates from wear and damage
Reversible Bolt-on Cutting Edge
When you want to cut right down to the surface. Reversible and bolted on for easily replacement.
Reinforced A-Frame
Adds extra strength to the a-frame
Quick Hitch
Available in category #2 and #3
Hydraulic Deflector
Add a cylinder to the single deflector
3-Section Spout Deflector
Increase your ability to place the snow where you want it
Video
Lucknow Snowblowers
Downloads
Customer Testimonials
EJ’s Excavating & Snow Removal - Traverse City, Michigan
I have been doing commercial snow removal for 10 years now. [My LuckNow snowblower] has been great. Built really stout. I've replaced bearings and sprockets and chains and done some welding of rusted out steel. I installed a removable cutting edge on the bottom and extended the side wings out past the auger. It’s very fast. I’m on my 3rd tractor. Thanks for such a great product.
Bill Hibbard - Sault Ste. Marie, Ontario
Bill has been using his snowblower for more than 30 years and has now passed it on to his son-in-law, who expects it to last for decades more.
“It’s nice to still have Canadian made equipment available that can pass from one generation to the next”.