Heavy Duty Gearbox
Heavy duty oil filled gearboxes
Single auger snowblowers for a wide range of tractor sizes.
Cutting widths of 60" to 108"
Manual and hydraulic chute rotator (hydraulic cylinder or orbital motor) available on most models (refer to spec sheet for configurations).
Heavy augers and shaft, 4 blade fan, greaseable bearings, heavy duty gearbox, tapered roller bearings.
Available options include – spout deflectors, skid shoes, cutting edge and more
|Approx. Weight (Lbs.)||510||545||885||920||995||1430||1570|
|Fan Shaft Diameter||1 3/8||1 3/8||40mm||40mm||40mm||1 3/4||1 3/4|
|Fan Housing Width||8||8||8||8||8||12||12|
|Fan Housing (thickness)||10 ga.||10 ga.||10 ga.||10 ga.||10 ga.||3/16||3/16|
|Auger Shaft Diameter||1 1/4||1 1/4||1 7/16||1 7/16||1 7/16||1 7/16||1 7/16|
|Auger Flighting Thickness||5/16||5/16||1/2||1/2||1/2||1/2||1/2|
|Auger Chain Size||#60||#60||#60||#60||#60||#80||#80|
|Hydraulic Chute Rotator||Opt.||Opt.||N/A||N/A||N/A||N/A||N/A|
|Orbital Motor Chute Rotator||Opt.||Opt.||Opt.||Opt.||Opt.||Stan.||Stan.|
|Spout Deflector (Single)||Stan.||Stan.||Stan.||Stan.||Stan.||Stan.||Stan.|
|Hitch Category||1 & 2||1 & 2||1 & 2||1 & 2||1 & 2||2||2|
|Recommended H.P. (min)||20||20||35||40||50||80||80|
|Recommended H.P. (max)||35||35||70||70||90||105||105|
H.P. recommendations are suggested only (pending snow and ground speed conditions and transmission type)
Unless otherwise indicated, all dimensions are in inches with standard equipment installed.
Specifications subject to change without notice.
Certain features shown may be optional.
Heavy duty oil filled gearboxes
Heavy augers & shafts, thick wall steel end plates & shell, greaseable bearings
Control where you want the snow to be blown
Heavy duty PTO shaft with shear bolt protection
Heavy duty four blade fan on all models
An easy to turn crank system for hood rotation
Allows rotation of the hood without the manual effort.
(Models S5 & S6 only)
Precise hood rotation with a hydraulic orbital motor and a durable gear drive. Standard on models S100 & S9
Prevent scratching or digging in of expensive driveways (models S5-S75)
Prevent scratching or digging in of expensive driveways with a heavy duty adjustable skid shoe (models S100-S9)
Keeps your blower end plates from wear and damage
When you want to cut right down to the surface. Reversible and bolted on for easily replacement.
Adds extra strength to the a-frame
Available in category #2 and #3
Add a cylinder to the single deflector
Increase your ability to place the snow where you want it
I have been doing commercial snow removal for 10 years now. [My LuckNow snowblower] has been great. Built really stout. I've replaced bearings and sprockets and chains and done some welding of rusted out steel. I installed a removable cutting edge on the bottom and extended the side wings out past the auger. It’s very fast. I’m on my 3rd tractor. Thanks for such a great product.
I have recently purchased a 7 foot Lucknow and wouldn't trade it for anything. Your product is the best built that I have seen or used and is worth every penny. I wish I could get the tractor and snowblower up the front walk, that way I wouldn't have to shovel at all.