Heavy Duty Gearbox
Heavy duty oil filled gearboxes
Single Auger
Images
Highlights
Single auger snowblowers for a wide range of tractor sizes.
Cutting widths of 60" to 108"
Manual and hydraulic chute rotator (hydraulic cylinder or orbital motor) available on most models (refer to spec sheet for configurations).
Heavy augers and shaft, 4 blade fan, greaseable bearings, heavy duty gearbox, tapered roller bearings.
Available options include – spout deflectors, skid shoes, cutting edge and more
Specifications
| MODEL SIZE | S5 | S6 | S65 | S7 | S75 | S100 | S9 |
| Approx. Weight (Lbs.) | 510 | 545 | 885 | 920 | 995 | 1430 | 1570 |
| Cutting Width | 60 | 72 | 78 | 84 | 90 | 100 | 108 |
| Cutting Height | 24 | 24 | 30 | 30 | 30 | 33 | 33 |
| Fan Shaft Diameter | 1 3/8 | 1 3/8 | 40mm | 40mm | 40mm | 1 3/4 | 1 3/4 |
| Fan Blades | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| Fan Diameter | 22 | 22 | 26 | 26 | 28 | 28 | 28 |
| Fan Housing Width | 8 | 8 | 8 | 8 | 8 | 12 | 12 |
| Fan Housing (thickness) | 10 ga. | 10 ga. | 10 ga. | 10 ga. | 10 ga. | 3/16 | 3/16 |
| Auger Diameter | 14 | 14 | 17 | 17 | 17 | 20 | 20 |
| Auger Shaft Diameter | 1 1/4 | 1 1/4 | 1 7/16 | 1 7/16 | 1 7/16 | 1 7/16 | 1 7/16 |
| Auger Flighting Thickness | 5/16 | 5/16 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 |
| Auger Chain Size | #60 | #60 | #60 | #60 | #60 | #80 | #80 |
| Chute Diameter | 12 | 12 | 12 | 12 | 12 | 13 | 13 |
| Chute Length | 36 | 36 | 36 | 36 | 36 | 48 | 48 |
| Hydraulic Chute Rotator | Opt. | Opt. | N/A | N/A | N/A | N/A | N/A |
| Orbital Motor Chute Rotator | Opt. | Opt. | Opt. | Opt. | Opt. | Stan. | Stan. |
| Spout Deflector (Single) | Stan. | Stan. | Stan. | Stan. | Stan. | Stan. | Stan. |
| Hitch Category | 1 & 2 | 1 & 2 | 1 & 2 | 1 & 2 | 1 & 2 | 2 | 2 |
| Recommended H.P. (min) | 20 | 20 | 35 | 40 | 50 | 80 | 80 |
| Recommended H.P. (max) | 35 | 35 | 70 | 70 | 90 | 105 | 105 |
H.P. recommendations are suggested only (pending snow and ground speed conditions and transmission type)
Unless otherwise indicated, all dimensions are in inches with standard equipment installed.
Specifications subject to change without notice.
Certain features shown may be optional.
Features
Standard
Robust Build
Heavy augers & shafts, thick wall steel end plates & shell, greaseable bearings
Single Section Spout Deflector
Control where you want the snow to be blown
Heavy PTO shaft
Heavy duty PTO shaft with shear bolt protection
Four Blade Fan
Heavy duty four blade fan on all models
Manual Hood Rotator
An easy to turn crank system for hood rotation
Optional
Hydraulic Rotator
Allows rotation of the hood without the manual effort.
(Models S5 & S6 only)
Orbital Rotator
Precise hood rotation with a hydraulic orbital motor and a durable gear drive. Standard on models S100 & S9
Bolt-On Skid Shoes
Prevent scratching or digging in of expensive driveways (models S5-S75)
Weld-On Skid Shoes
Prevent scratching or digging in of expensive driveways with a heavy duty adjustable skid shoe (models S100-S9)
Reinforced End Plates
Keeps your blower end plates from wear and damage
Reversible Bolt-on Cutting Edge
When you want to cut right down to the surface. Reversible and bolted on for easily replacement.
Reinforced A-Frame
Adds extra strength to the a-frame
Quick Hitch
Available in category #2 and #3
Hydraulic Deflector
Add a cylinder to the single deflector
3-Section Spout Deflector
Increase your ability to place the snow where you want it
Video
Lucknow Snowblowers
Downloads
Customer Testimonials
Lane Wilson - Airdrie Alberta
Lane recently purchased a LuckNow snowblower and couldn't be happier. "Why didn't I buy it a long time ago?" he mused. He said it made short work of the 200 foot by 3 foot deep snow drift he recently had to clear.
Tyson Hainsworth - Bowden, Alberta
Tyson is still using a blower originally built in 1983. He has this to say "This snowblower never gives me problems and the company is amazing to work with for any service work needed. I would definitely buy another product from them and refer anyone I know to them as well."