Four Auger Horizontal Mixing
Provides a thorough mix with less HP
Horizontal Mixers - Trailer
Images
Highlights
Horizontal four auger mixers in a trailer version with capacities from 260 to 900 cubic feet.
The mixing augers are pto driven, the door and discharge are hydraulically operated.
The heavy duty horizontal four-auger design are capable of giving the mix required, from rations with well cured, long stemmed legume-type hay, to mixes with green grass, and mixes with silage and commodities. Better milk production, better weight gains and greatly improved animal health are just some of the results of a finely-tuned feed ration.
All LuckNow mixers are equipped with Digi-Star scale systems.
Specifications
| MODEL SIZE | 4260 | 4310 | 4360 | 4410 | 4440 | 4500 | 4550 | 4625 | 4750 | 4900 |
| Base Mixing Capacity (cubic feet) |
260 | 310 | 360 | 410 | 440 | 500 | 550 | 625 | 750 | 900 |
| Overall Length | 190 | 214 | 238 | 238 | 244 | 268 | 248 | 272 | 272 | 320 |
| Overall Height | 90 | 90 | 91 | 97 | 101 | 101 | 112 | 112 | 118 | 122 |
| Tread Width | 81 | 81 | 84 | 84 | 94 | 94 | 100 | 100 | 100 | 101 |
| Hopper Size | 84 x 120 | 84 x 144 | 84 x 168 | 84 x 168 | 84 x 168 | 84 x 192 | 87 x 168 | 87 x 192 | 96 x 192 | 96 x 240 |
| Discharge Length | 36 | 36 | 42 | 42 | 42 | 42 | 42 | 42 | 42 | 42 |
| Bottom Augers- Tube | 5 x ½ | 5 x ½ | 6 5/8 x ½ | 6 5/8 x ½ | 8 5/8 x ½ | 8 5/8 x ½ | 8 5/8 x ½ | 8 5/8 x ½ | 8 5/8 x ½ | 10 ¾ x ½ |
| Bottom Augers - Flighting | 3/8 & ½ | 3/8 & ½ | 3/8 & ½ | 3/8 & ½ | ½ & 5/8 | ½ & 5/8 | ½ & 5/8 | ½ & 5/8 | ½ & 5/8 | 3/4 |
| Bottom Augers - Diameter | 20 | 20 | 20 | 20 | 24 | 24 | 30 | 30 | 30 | 30 |
| Top Augers - Tube | 4 ½ x 3/8 | 4 ½ x 3/8 | 5 x ½ | 5 x ½ | 6 5/8 x ½ | 6 5/8 x ½ | 6 5/8 x ½ | 6 5/8 x ½ | 6 5/8 x ½ | 8 5/8 x ½ |
| Top Augers - Flighting | 3/8 | 3/8 | 3/8 | 3/8 | 3/8 | 3/8 | 3/8 | 3/8 | 3/8 | 1/2 |
| Top Augers - Diameter | 20 | 20 | 20 | 20 | 24 | 24 | 28 | 28 | 28 | 30 |
| Shaft Diameter - Drive Bottom | 3 | 3 | 3 | 3 7/16 | 3 15/16 | 3 15/16 | 3 15/16 | 3 15/16 | 3 15/16 | 3 15/16 |
| Shaft Diameter - Drive Top | 2 1/2 | 2 1/2 | 2 1/2 | 3 | 3 | 3 | 3 | 3 | 3 7/16 | 3 7/16 |
| Bearings Drive | QM | QM | QM | QM | SFCW | SFCW | SFCW | SFCW | SFCW | SFCW |
| Sprockets Drive | S Taper | S Taper | S Taper | S Taper | S Taper | S Taper | S Taper | S Taper | S Taper | S Taper |
| Tires | 11 or 12R 22.5 |
11 or 12R 22.5 |
385/65R 22.5 |
385/65R 22.5 |
425/65R 22.5 |
425/65R 22.5 |
425/65R 22.5 |
425/65R 22.5 |
425/65R 22.5* |
385/65R 22.5 (x4)** |
| Roller Chains | 80-120 | 80-120 | 80-120 | 80H-120 | 100 - 140 | 100 - 140 | 100 - 160 | 100 - 160 | 100 - 160 | 120 - 160 |
| Approx. Weight (lbs.) | 8,600 | 9,750 | 11,150 | 11,250 | 14,000 | 15,200 | 18,000 | 20,940 | 23,500 | 26,540 |
Unless otherwise indicated, all dimensions are in inches and pounds with standard equipment installed.
Specifications subject to change without notice.
Certain features shown may be optional.
*Model 4750 available with tandem axle
**Model 4900 standard tandem axle
Features
Standard
Planetary Gearbox
Heavy duty planetary gear reduction to reduce input HP
Grease Bank
One location to lubricate all drive components
Heavy Duty Sealed Bearings
Heavy duty sealed bearings on the drive end of all augers
Ledger with Shear Bar
The addition of a ledger with a shear bar near the augers increases the cutting for those harder to mix rations
1/4" Steel Liners
1/4" thick steel bottoms with an extra 1/4" thick steel liner for additional wear resistance
Oil Bath
The rear oil bath allows for continuous lubrication of chains and sprockets
Rear Safety Lights
For extra visibilty when travelling in low-light conditions
Slip Clutch PTO
A slip clutch PTO to protect the driveline
Scale System
A Digi-Star four point scale system is standard
Re-capped truck tires
Helicoid Flight Auger Discharge
For fast and complete unloading of your ration
Adjustable Hitch
Easily adjustable hitch with replaceable clevis
Rear Bumper
For added protection against damage
Optional
Special Discharge Lengths
Special lengths of discharge chutes to meet your unloading requirements
Bolt-On Auger Knife Kit
Give more cutting power to your augers in higher hay rations with bolt-on tungsten coated knives
Hydraulic Raise and Lower
Raise and lower the discharge from the comfort of your cab
Bolt-On Kicker Paddle and Knife Kit
Increase cutting action where most of the resistance occurs - at the discharge door. Switch out the knife for a paddle to increase discharge action
Discharge Magnet
Add a magnet in the discharge flap to remove unwanted metal fragments
Stainless Liners
Several options of stainless liners are available on all our Horizontal mixers
Discharge flap
Add a flap to the discharge chute for increased control while unloading
Scale Options
A large number of scale options are available including wireless systems, remotes, large view indicators and more.
See the download section for more information.
Tire Options
A number of tire options are available
Paint Colour
We like our standard LuckNow blue - but you don't have to. Ask about our colour selection
Video
Lucknow Four Auger TMR Mixer Feeders
Downloads
Customer Testimonials
Mark Mueller, Miller Dairy - Greenleaf, Wisconsin
I highly recommend any LuckNow product. They are great products and a great company to deal with. The service we receive from our dealer, L&L Sales, is great also.
Louis Fontinato - Campbellville, Ontario
Louis Fontinato, former NHL’er with the New York Rangers in the 50’s and 60’s runs a cattle operation in Campbellville, Ontario. He feeds two loads per day consisting of corn silage and haylage. Lou purchased his 285 mixer in September of 1983 making it one of the first ones we ever produced. He has kept it very well maintained and it’s still going strong today. In Lou’s words, “There’s nothing like a LuckNow”