Four Auger Horizontal Mixing
Provides a thorough mix with less HP
Horizontal Mixers - Truck
Images
Highlights
Have It Your Way
All the models listed below have the option to be mounted on a truck, allowing you to be more flexible and versatile.
A wide variety of options are available.
Contact us for full details and truck specifications.
All LuckNow mixers are equipped with Digi-Star scale systems
Specifications
| MODEL SIZE | 4400 | 4500 | 4550 | 4625 | 4750 | 4900 |
| Base Mixing Capacity (cubic feet) |
440 | 500 | 550 | 625 | 750 | 900 |
| Overall Length | 195 1/2 | 219 1/2 | 195 1/2 | 219 1/2 | 219 1/2 | 267 1/2 |
| Mixer Height | 72 1/2 | 72 1/2 | 81 1/2 | 81 1/2 | 87 1/2 | 87 1/2 |
| Overall Height | 79 | 79 | 90 | 90 | 96 | 96 |
| Tread Width | 96 | 96 | 96 | 96 | 96 | 96 |
| Discharge Length | 36 | 36 | 36 | 36 | 36 | 36 |
| Cab to Axle Min. | *125 / **103 | *147 / **127 | *125 / **106 | **130 | **130 | **164 |
| Cab to Frame Min. | *158 / **158 | *180 / **180 | *158 / **158 | **180 | **180 | **226 |
| Hopper Size | 84x168 | 84x192 | 87x168 | 87x192 | 96x192 | 96x240 |
| Bottom Augers- Tube | 8 5/8 | 8 5/8 | 8 5/8 | 8 5/8 | 8 5/8 | 10 3/4 |
| Bottom Augers - Flighting | 1/2 & 5/8 | 1/2 & 5/8 | 1/2 & 5/8 | 1/2 & 5/8 | 1/2 & 5/8 | 3/4 |
| Bottom Augers - Diameter | 24 | 24 | 30 | 30 | 30 | 30 |
| Top Augers - Tube | 6 5/8 | 6 5/8 | 6 5/8 | 6 5/8 | 6 5/8 | 8 5/8 |
| Top Augers - Flighting | 3/8 | 3/8 | 3/8 | 3/8 | 3/8 | 1/2 |
| Top Augers - Diameter | 24 | 24 | 28 | 28 | 28 | 30 |
| Shaft Diameter - Drive Bottom | 3 15/16 | 3 15/16 | 3 15/16 | 3 15/16 | 3 15/16 | 3 15/16 |
| Shaft Diameter - Drive Top | 3 | 3 | 3 | 3 | 3 7/16 | 3 7/16 |
| Bearings Drive | SFCW | SFCW | SFCW | SFCW | SFCW | SFCW |
| Sprockets Drive | S Taper | S Taper | S Taper | S Taper | S Taper | S Taper |
| Scale Chains | 4 Point | 4 Point | 4 Point | 4 Point | 4 Point | 4 Point |
| Roller Chains | 100-140 | 100-140 | 100-160 | 100-160 | 100-160H | 120-160H |
| Approx. Weight (lbs.) | 12,700 | 13,800 | 16,500 | 19,400 | 20,200 | 24,500 |
*single axle **double axle
Unless otherwise indicated, all dimensions are in inches with standard equipment installed.
Specifications subject to change without notice.
Certain features shown may be optional.
Features
Standard
Planetary Gearbox
Heavy duty planetary gear reduction to reduce input HP
Grease Bank
One location to lubricate all drive components
Heavy Duty Sealed Bearings
Heavy duty sealed bearings on the drive end of all augers
Ledger with Shear Bar
The addition of a ledger with a shear bar near the augers increases the cutting for those harder to mix rations
1/4" Steel Liners
1/4" thick steel bottoms with an extra 1/4" thick steel liner for additional wear resistance
Oil Bath
The rear oil bath allows for continuous lubrication of chains and sprockets
Scale System
A Digi-Star four point scale system is standard
Helicoid Flight Auger Discharge
For fast and complete unloading of your ration
Optional
3 Auger Discharge
Three auger discharges are available on most models for quicker unloading
Discharge Chute Options
All of the discharge options available on trailer models are possible on truck mounts as well
Auger Options
All of the auger options available on trailer models are possible on truck mounts as well
Stainless Liners
Several options of stainless liners are available on all our Horizontal mixers
Mixer Drive Options
Choose between hydrostatic and mechanical truck drives with a number of options
Scale Options
A large number of scale options are available including in cab controls.
See the download section for more information
Paint Colour
We like our standard LuckNow blue - but you don't have to. Ask about our colour selection